**WH Bed May be Shown with Options. Click for larger image.

Western Hauler Truck Bed

The WH is our top of the line bed. The Norstar Western Hauler Bed is sure to win first in class when you combine with your first class hauling rig. The standard 2.5” receiver allows you to add a hitch for bumper pull cargo and a 2 5/16” gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. This bed is the perfect fit for any single or dual wheeled work truck and can keep up with your daily workload. The WH comes equipped and ready to impress loaded with 1/8” diamond plate floor and 10 gauge sides with 11 gauge skirted bumper are coated in gloss black powder coat. Accessories are abound and the details have been sweated to ensure spectacular fit and finish. But this bed is not all show, it has the same rugged construction as every Norstar bed and can haul anything your rig can pull. We have put just about every option on this bed except the kitchen sink – standard including cast housings on rear lighting, fuel filler and license plate mount, chrome accented head rack lighting, running boards and loads of diamond plate trim . Go to work - in style.

Additional Images

WH Truck Bed Details


  • Structural Steel Frame
  • 2" 18.5k Rated Bumper Receiver
  • 30k Rated 2 5/16" Gooseneck Ball
  • 4” Runner Channels (Adjustable on 56” CTA Only)
  • Formed 3 x 3/16” Channel Cross Members
  • Steel Tube Head Rack w/ Cross Bars, Tail & Rev. Lights
  • Steel 1/8” Diamond Plate Floor
  • Built in Gooseneck Well w/ Ball Mounted & Diam Plate Lid
  • Skirted Rear Bumper w/ Anti Slip Step
  • 2 Aluminum Cast Angled Fuel Fillers
  • Aluminum Cast Tail Light Housing
  • Aluminum Cast License Plate Housing
  • Aluminum Trim Package
  • 11 Ga Steel Construction
  • 4 Side Swing Tool Box Doors w/ Chrome Hinges (Except Megacab)
  • 7 Way Plug in Gooseneck Trough
  • 4 Recessed D-Rings
  • 18” Gooseneck Trough
  • Dove Tail
  • Powder Coated Black
  • Chrome Accent Lighting
  • 2.5” LED Reflective Marker Lights
  • 4 Clear 6” Oval LED Rev. Lights
  • 6 Red 6” Oval LED ST/TL/TN Lights
  • Single LED License Plate Light
  • All Lighting DOT Approved
  • Molded Sealed Harness w/ Resistors
  • 4/5 & 7 Way Receiver Female Plug w/ ADAPTER
  • 15k Rated Receiver, 30k Rated GN Ball
  • Mudflap Brackets
  • 11 Ga Bumper
  • 10 Ga Sides
  • 6" Channel Runners
  • Additional Cross Member
  • C-TECH 6 Drawers Tool Cabinet
  • Extend Head Rack From Standard Height
  • Smooth Stainless Steel Polished Fender
  • Tail Gate Fold Down w/ Latch
  • Flush Mount 5k Tie Down
  • Chrome Accent Light Package

Norstar Bed Size Guide


Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

  • Length: Measurement from cab to end of frame.
  • Width: Measurement from outside of tire to outside of tire
  • CTA: Measurement from cab to axle
  • Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
  • Models: ST, SF, SR, SD
  • Order Method: Model x Length x Width x CTA x Runner
  • Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

Ford:

1998-Present
  • Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
  • Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
  • F-350 takes a 92”W
  • F-450 & 550 are 94” & 97”W with Standard Headache Rack
  • 2015 F650 Runners 34.5”

GM / Chevrolet:

2001-Present
  • Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
  • Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
  • (Prior to 2000 measurements will be required)
  • 4500 & 5500 is 94”W with 60” Headache Rack

Dodge:

2003-Present
  • 2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
  • Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
  • Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
  • Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
  • 2002 and earlier will have 56” CTA and 38” Runners on long bed

Plug N Play

Installation ADapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

  • 1001010   WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
  • 1001009   WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
  • 1001011   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
  • 1001013   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
  • 1001012   WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
  • 1001014   WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)



Contact Us


Norstar Company
5500 FM 38 N
Brookston, TX, 75421
P:(903)784-8900
Email Us
sales@norstarcompany.com
| | | | | | |