**ST Bed May be Shown with Options. Click for larger image.

Skirted Truck Bed

Need a working truck bed with a little extra built in storage? Our ST skirted truck bed might be just for you. Four locking boxes are standard on this bed and 10 gauge sides are mated with the 11 gauge full skirted bumper. The standard 2.5” receiver allows you to add a hitch for bumper pull cargo and a 2 5/16” gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. This bed is the perfect fit for any single or dual wheeled work truck and can keep up with your daily workload. 1/8” Diamond plate flooring will give you a lifetime of duty and both 7 way and 4 way towing plugs make sure you can hook up and go any time. Standard lifetime LED lights ensure you will never be left in the dark and the tubular steel headache rack will protect your cab from most anything you can throw its way. Standard angled corners help you maneuver into tight spaces and standard exposed rub rail and stake pockets give you plenty of contact points for securing any load. Check out our optional features and build a bed to suit your workload today.

Additional Photos

ST Truck Bed Details


  • Structural Steel Frame
  • 2" 18.5k Rated Bumper Receiver
  • 30k Rated 2 5/16" Gooseneck Ball
  • 4” Runner Channels (Adjustable on 56” CTA Only)
  • Formed 3 x 3/16” Channel Cross Members
  • Steel Tube Head Rack w/ Cross Bars, Tail & Rev. Lights
  • Steel 1/8” Diamond Plate Floor
  • Built in Gooseneck Well w/ Ball Mounted & Diam Plate Lid
  • Angled Fuel Filler Neck & DEF Ready
  • Skirted Rear Bumper with Anti Slip Step
  • Receiver Hitch Ready
  • 11 Ga Steel Construction
  • Mudflap Brackets
  • 7 Way Plug in Gooseneck Box
  • Removable Smooth Plate Fenders
  • Powder Coated Black
  • 2.5” LED Reflective Marker Lights
  • 4 Clear 6” Oval LED Reverse Lights
  • 6 Red 6” Oval LED ST/TL/TN Lights
  • Single LED License Plate Light
  • All Lighting DOT Approved
  • Molded Sealed Harness with Resistors
  • 4/5 & 7 Way Receiver Female Plug w/ ADAPTER
  • Front and Rear Tool Boxes Standard
  • 11 Ga Bumper
  • 6" Channel Runners
  • Additional Cross Member
  • Additional Stake Pockets
  • Rear Stake Pokets w/ Rub Rail
  • Extend Head Rack From Standard Height
  • Smooth Stainless Steel Polished Fender
  • Flush Mount 5k Tie Down
  • Chrome Accent Light Package
  • Weld on 2.5" D-ring
  • 7 Way Plug Installed in Gooseneck Box
  • Aluminum Cast Rear License Plate Housing
  • Dual LED Head Rack Work Lights
  • Single LED Head Rack Work Lights
  • Gooseneck Trough
  • Aluminum Diamond Plate Trim
  • Diamond Plate .188" Floor
  • Dove Tail
  • B & W Turnover Ball 2-5/16"

Norstar Bed Size Guide


Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

  • Length: Measurement from cab to end of frame.
  • Width: Measurement from outside of tire to outside of tire
  • CTA: Measurement from cab to axle
  • Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
  • Models: ST, SF, SR, SD
  • Order Method: Model x Length x Width x CTA x Runner
  • Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

Ford:

1998-Present
  • Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
  • Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
  • F-350 takes a 92”W
  • F-450 & 550 are 94” & 97”W with Standard Headache Rack
  • 2015 F650 Runners 34.5”

GM / Chevrolet:

2001-Present
  • Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
  • Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
  • (Prior to 2000 measurements will be required)
  • 4500 & 5500 is 94”W with 60” Headache Rack

Dodge:

2003-Present
  • 2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
  • Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
  • Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
  • Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
  • 2002 and earlier will have 56” CTA and 38” Runners on long bed

Plug N Play

Installation ADapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

  • 1001010   WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
  • 1001009   WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
  • 1001011   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
  • 1001013   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
  • 1001012   WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
  • 1001014   WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)



Contact Us


Norstar Company
5500 FM 38 N
Brookston, TX, 75421
P:(903)784-8900
Email Us
sales@norstarcompany.com
| | | | | | |